COLLABORATIVE PUMP – 2020 SYSTEM

Superior Performance and Value

Autoquip 2020™ Metering Systems featuring the Autoquip Collaborative Pump™ deliver superior performance and value. Autoquip 2020™ Metering Systems provide a near pulseless fluid output with the least number wetted components and no exposed fluid seals. The Autoquip 2020™ System is designed to focuse on the flexibility, reliability, and durability of a diaphragm pump. The Autoquip Collaborative™ Pump adaptations supercharge diaphragm pump performance.

Autoquip offers the Collaborative™ Pump stand alone or as a component in a Autoquip 2020™ System. Autoquip 2020™ Systems include both all mechanical and electromechanical control systems. Mechanical designs are highly affordable, flexible, and durable. Autoquip electromechanical 2020™ Systems add electronic controls, user touch screens, material usage tracking, status monitoring and advanced fault detection.

Collaborative Pump

The Collaborative Pumping Cycle

2020-pump-small

Collaborative pumps overlap to remove unwanted pressure drop. Figure A depicts the starting position where both pump chambers are filled with liquid (green).

In Figure B, Pump A is displacing fluid generating pressure and flow (red). At a predetermined location, Figure B, Pump B is pressurized overlapping the pumping stroke of Pump A.

“Pump Collaboration”
Collaboration completes when Pump A retracts (Figure C) refilling the Pump A chamber for the next overlap.

In Figure D, Pump B produces pressure and flow until again a predetermined location and the start of the Pump B plus Pump A “Collaboration.”

col • lab•o • r a • tive
/kә’lab(ә)rәdiv/
adjective
Produced or conducted by two or more parties working together. “collaborative research”

2020™ Systems

2020 2K Collaborative Pump System

Ready to Spray Models Featuring Integrated

  • Gun Atomization
  • Fluid Control
  • Air Flow Switches
  • Suction Tubes
  • Material Storage
  • Gun Bundles and Storage

Specifications

  • Ratio 0 to 30:1 – Flow Dependent
  • Variable Ratio
  • Flow 30 cc/m – 2000 cc/m
  • Tolerance +/- 5%
  • Pump Operating Range 10PSI -100 PSI
  • Viscosity 10-10,000 CPS
  • Wetted Section – 316 stainless, Aluminum
  • 80 PSI Supply Air – Less Than 5 SCFM
  • Supply voltage 110 VAC- Less Than 250 Watts

Benefits

  • Better Than a Pressure Pot
  • Eliminate Pressure Vessel
  • Simple To Understand
  • Minimal Moving Parts
  • No Fluid Supply Required
  • Low Maintenance Cost
  • Minimal Coating Shear
  • No Fluid Regulator Required
  • Justifiable ROI
collaborative-pump

Wide Variety of Applications

  • Ceramic Materials- Sanitary and Foundry Flow Control
  • UV Coatings
  • Adhesives
  • Filled Coatings
  • Batch Dispense Systems
  • Moisture Sensitive Materials
  • Waterborne Electrostatic Flow Control
  • 2k Metering & Mixing
  • 1k Flow Control
1K - 2020

2020 Single Component 2020 Systems

screen-shot-2021-06-28-at-1.57.56-pm

Superior ROI
Atomizing coatings with improper process inputs reduces work waste material. Repeatable atomizing air and fluid flow are crucial to the development of smooth and repeatable finish layers. The lower the flow rate less variance is allowed. The Autoquip 2020 System provides a scalable/repeatable flow stream to the atomizer. The resulting ROI is substantial. Start with at least a 15% transfer efficiency increase over an open loop air piloted fluid regulator system and 10% increase in FPY “First Pass Yield”.

Features and Benefits

  • Collaborative™ Pump Technology delivers extraordinarily stable single component flow rates.
  • The Pump bodies are available in 316 Stainless, Aluminum, and Polypropylene wetted materials
  • Pump diaphragms are available in Buna, Neoprene, Santoprene, PTFE
  • Flow rates to 2 gallon per minute.
2K - 2020

2020 Plural Component 2020 Systems

Features and Benefits

  • Pneumatic Controls
  • Manual Pump Regulators
  • 3/8”-1/2” Pump A
  • 3/8”-1/2” Pump B
  • Dual gun capability
  • Fixed Ratio
  • 6:1 Max Ratio
  • 1250 ccm max flow
  • 5%
  • Manual Flush
  • Electronic Control – 6” Color/Touch HMI
  • SMC – Electropneumatic Regulators
  • ¼”-¾” Resin Pump
  • ¼”-3/4” Catalyst Pump
  • Dual Gun Capability
  • Optional Gun Governor or Auto Flow Control
  • 30:1 Max Ratio
  • 2000 ccm Max Flow
  • 5% Tolerance
  • Manual or Auto Flush
  • Multiple Ratio Assurance Modes

2k Continuous Metering: $8,000

  • Pneumatic Control
  • Pneumatic Operators
  • 3/8” Aluminum Pump A
  • 3/8” Aluminum Pump B
  • Suction Tubes
  • 100 cc Integrator
  • Manual 3 Way Flushing Valves
  • Cart

2K Batch Metering: $8,500

  • Pneumatic Control
  • Pneumatic Operators
  • 3/8” Aluminum Pump A
  • 3/8” Aluminum Pump B
  • Suction Tubes
  • Batch Counter
  • Pump A Dispense Valve
  • Pump B Dispense Valve
  • Cart
2K - 2020e

2020 Plural Component 2020 Systems

Features and Benefits

  • Pneumatic Controls
  • Manual Pump Regulators
  • 3/8”-1/2” Pump A
  • 3/8”-1/2” Pump B
  • Dual gun capability
  • Fixed Ratio
  • 6:1 Max Ratio
  • 1250 ccm max flow
  • 5%
  • Manual Flush
  • Electronic Control – 6” Color/Touch HMI
  • SMC – Electropneumatic Regulators
  • ¼”-¾” Resin Pump
  • ¼”-3/4” Catalyst Pump
  • Dual Gun Capability
  • Optional Gun Governor or Auto Flow Control
  • 30:1 Max Ratio
  • 2000 ccm Max Flow
  • 5% Tolerance
  • Manual or Auto Flush
  • Multiple Ratio Assurance Modes

2k Continuous Metering: $8,000

  • Pneumatic Control
  • Pneumatic Operators
  • 3/8” Aluminum Pump A
  • 3/8” Aluminum Pump B
  • Suction Tubes
  • 100 cc Integrator
  • Manual 3 Way Flushing Valves
  • Cart

2K Batch Metering: $8,500

  • Pneumatic Control
  • Pneumatic Operators
  • 3/8” Aluminum Pump A
  • 3/8” Aluminum Pump B
  • Suction Tubes
  • Batch Counter
  • Pump A Dispense Valve
  • Pump B Dispense Valve
  • Cart
Contact Us

Have a question? Send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search