Conventional pumping systems reciprocating motion produce unwanted fluid output pressure drops negatively effecting process control

The Autoquip Collaborative™ Pump and control system smooths the pulses by overlapping the pump cycles at pump change over. Additionally, pump position sensors monitor travel generating volume and rate information. If desired the rate can be controlled by modulating the pumping pressure accordingly.

The Starting Position Cycle is the initial pump cycle. Once fluid movement commences the starting cycle is removed.

The Pumping A Only Cycle provides a programmable fluid pressure and if desired rate to the spray gun. A position sensor monitors the volume pumped and steps the cycle at a predetermined pump A volume output.

The Pumping A Plus B Cycle is the second run time pumping cycles. The Pumping A Plus B Cycle eliminates fluid pressure degradation experienced with conventional double diaphragm pumps by allowing the pump B to reach process pressure before pump A is retracted and filled.

The Pumping B Cycle provides a programmable fluid pressure and if desired rate to the spray gun. A sensor on pump B monitors the volume pumped and steps the cycle at a predetermined volume output.
The Autoquip 3100-00-00A 500 CC per minute maximum flow. The Autoquip patent pending Collaborative™ Pump provides a pulse free constant flowrate rate to process equipment. The pump housing components are available in plastic, aluminum, and stainless with a number of different polymer and elastomer wetted surfaces. The Autoquip Collaborative™ pump has no external seals for best in class abrasive and moisture cure fluid applications.
Ready to order? Click here to find an Autoquip distributor near you.